Z18 fluorescent tracer dye
Super low viscosity
High modulus
30 min.
2:1
Pressure injection of hairline cracks, delamination, gravity feed of cracks, epoxy resin binder for patching and overlay
PRO-POXY 100
ASTM C-881
Application
Features
Gel Time*
Mix Ratio
Recommended Use
Grade 1, Types I, II, IV, V
Class B, C
Injection resin
Low viscosity
High modulus
30 min.
2:1
Pressure injection of cracks in structural concrete and masonry, gravity feed of cracks, binder for mortar patching and overlay.
Slow Set Injection Resin
ASTM C-881
Application
Features
Gel Time*
Mix Ratio
Recommended Use
Grade 1, Types I, II, V
Class B, C
Injection resin
Ultra long gel time, economical
2 hrs.
2:1
Pressure injection of cracks in structural concrete and masonry, gravity feed of cracks, binder for mortar patching and overlay
PRO-POXY 204
ASTM C-881
Application
Features
Gel Time*
Mix Ratio
Recommended Use
Grade 2, Types I, II, IV, V
Class B, C
Bonding agent, injection resin
Medium viscosity, super strength, fast set
30 min.
1:1
Pressure injection of cracks in structural concrete and masonry, gravity feed of cracks, binder for mortar patching and overlay
PRO-POXY 200
ASTM C-881
Application
Features
Gel Time*
Mix Ratio
Recommended Use
Grade 2, Types I, II
Class B, C
Bonding agent, injection resin
Super strength, moisture-insensitive, excellent adhesion, corrosion-inhibiting
30 min.
1:1
Structural bonding of fresh to hardened & old to old concrete
Structural crack repair for larger cracks - .007-.030 in/.18-.76 mm
Vertical anchoring of rebar, dowels, threaded rod
Structural adhesive for concrete, masonry, metal, wood, etc.
Slow Set Bonding Agent
ASTM C-881
Application
Features
Gel Time*
Mix Ratio
Recommended Use
Grade 2, Types I, II, V
Class B, C
Bonding agent
Ultra long gel time, low exotherm, medium viscosity,
high modulus, corrosion-inhibiting
Up to 8 hrs.
2:1
Structural bonding of fresh to ardened & old to old concrete Corrosion inhibitor for steel
PRO-POXY TYPE III D.O.T.
ASTM C-881
Application
Features
Gel Time*
Mix Ratio
Recommended Use
Grade 1, Type III
Class B, C
Low modulus bonding agent for concrete overlays
Low viscosity, self-leveling Low modulus for shock absorption
Excellent bond strength
Meets AASHTO-AGC-ARTBA
15-30 min. in mass
1 hr. in thin film
1:1
Bonding skid-resistant overlays to bridges & elevated slabs Epoxy mortar for patching, low-modulus bonding agent
Protects new concrete, extends service life of old in bridge decks, parking decks, floors, columns
PRO-POXY 300
ASTM C-881
Application
Features
Gel Time*
Mix Ratio
Recommended Use
Grade 3, Types I, II,IV, V Class B, C
Non-sag, thixotropic, non-abrasive, injectable anchoring gel
For use in wet or damp holes
Free-thaw resistant, seismic Close edge distance
For solid or hollow
35 min.
1:1
Chemical anchoring, cap seal & port setting epoxy. Pressure injection for cracks in structural concrete, bonding irregular surfaces
PRO-POXY 300 FAST
ASTM C-881
Application
Features
Gel Time*
Mix Ratio
Recommended Use
Grade 3, Types I, II*,IV, V* Class B, C
Non-sag, thixotropic, non-abrasive, injectable anchoring gel
For use in wet or damp holes Free-thaw resistant, seismic
8 min.
1:1
Chemical anchoring, cap seal & port setting epoxy. Pressure injection for cracks in structural concrete, bonding irregular surfaces
PRO-POXY 300 PASTE
ASTM C-881
Application
Features
Gel Time*
Mix Ratio
Recommended Use
Grade 3, Types I, II,IV, V Class B, C
Non-sag, non-abrasive structural paste adhesive
Non-sag paste for vertical and Class B, C
overhead applications
Moisture-insensitive, thixotropic
35 min.
1:1
Cap seal and port setting epoxy, bonding irrecular surfaces
PRO-POXY 400
ASTM C-881
Application
Features
Gel Time*
Mix Ratio
Recommended Use
Grade 3, Types I, II*,IV, V* Class B, C
Cold weather epoxy acrylate hybrid anchoring gel
Works below 0°F Sets up in water-filled holes Guns to -5°F
Styrene-free
4 hrs. at 0°F/-18°C
6 min. at 80°F/27°C
10:1
Heavy-duty anchoring of rebar, threaded rod and epoxy-coated smooth dowels in all brick, concrete or stone masonry; best choice for structural bonding of heavy loads Grouting bolts, dowels and pins vertical and overhead, where rapid setting, fast turnaround are needed; performs in damp or water-filled holes
PRO-FLEX
ASTM C-881
Application
Features
Gel Time*
Mix Ratio
Recommended Use
Grade 2, Class B, C
Semi-rigid control joint sealant
Shaves easily, fast Pourable, self-leveling
Excellent shock-absorption
30 min.
1:1
Filling and sealing saw-cut control joints, random cracks Flexible, low-modulus adhesive
PRO-FLEX GEL
ASTM C-881
Application
Features
Gel Time*
Mix Ratio
Recommended Use
Semi-rigid sealant
Non-sag gel, pick-proof
Easy to mix
30 min.
1:1
Security sealant
PRO-POXY 2000
ASTM C-881
Application
Features
Gel Time*
Mix Ratio
Recommended Use
Epoxy machine
grout
High strength, low exotherm Low exotherm, deep pour capability, good oil and
chemical resistance
3.5 hrs.
Pre-packged
Critical new-equipment installation
Quick turnaround regrouting of foundations subject to oils, chemicals
PRO-POXY 2500
ASTM C-881
Application
Features
Gel Time*
Mix Ratio
Recommended Use
Epoxy patching mortar
Durable, low modulus Withstands free/thaw cycles, semi-rigid, compatible
with Type III overlays
30 min.
Pre-packged
Patching concrete on bridge decks, parking decks, floors, columns and beams. Repairing spalled areas. Plant
maintenance.
*Gel time is based on 2 oz. (60 g.) mass at 73°F ±2° (23°C). Gel time is initial set time. Ultimate strength time and thin film set time will be longer.
All of these products meet USDA specifications for use in food processing areas.
UNITEX PRO-POXY products are named with numbers relating to their level of viscosity. Lower numbers, like PRO-POXY 50, are super low viscosity for hair line crack injection. PRO-POXY 204 approximates the consistency of pancake batter, and PRO-POXY 300 PASTE approximates
the consistency of peanut butter. As the number in the name increases, the viscosity increases. (Exception: PRO-POXY 2000 has a flowable viscosity.) Viscosities are chosen to suit the job application. Epoxies of different viscosities than recommended may be used to suit unusual
applications. Consult UNITEX Technical Services for more information.